Posts in category: lead-division

Ramba Nucleos is designed for making lead cores used in full metal jacket or plated bullet production.

Like its Mini version, it is also fed by lead wire, the difference being that it is equipped with an innovative forming system, consisting of a triple rotary die that can guarantee almost twice the production rate compared to the Mini.

Ramba Nucleos in fact has a capacity of 400 pieces per minute. As well, the molds are easily changed according to customer requirements, and the lubrication system is centralized.

Ramba Mini Nucleos is designed for the manufacture of lead cores used in full metal jacket or plated bullet production. It is fed by lead wire, which is cut and successively introduced into a mold. Here it is pressed and successively ejected. The dies are easily changed according to customer requirements.

Mini nucleos is equipped with an automatic lubrication unit. The motion is given by brushless motors, which guarantee high permormance and excellent accuracy. It has a capacity from 0 to 240 pieces per minute.

The RAMBA LEAD STORM is a shot dripping line for the production of shot from 1.5 mm to 3.5 mm.

Capacity changes according to the size of shot from 150 Kg to 650 Kg per hour.

The 1 Ton wire unwinding device can be connected to the small-shot pressing machine RAMBA 115/380 or to other similar equipment.

It has been designed to unwind max 1 Ton wire of different size on specific coils. The small shot pressing machine RAMBA 115 /380 automatically controls unwinding speed.

The automatic wire-winding device RAMBA A1T usually works connected to our extruder RAMBA 114 or to other similar equipment.

Winding speed is automatically controlled by the extruder according to its output. To avoid breaking and stretching of wire the device is equipped with a sensor to check the wire loop.

A smaller model for 100 Kg coil is available too.

RAMBA 128 is generally operated with a RAMBA 122/01 ingot casting machine and is designed to square lead ingots and eliminate eventual depressions caused by cooling shrinking in order to obtain a constant length.

 

Ingots are fed into the RAMBA 128 by means of a chute and their ends are planed by two blades.

RAMBA 122/01 has been designed for  the automatic casting of cylindrical lead ingots (78 mm dia. – 200 mm long) to be used for the production of lead wire by means of the extruding press RAMBA 114.